The CP200 CHIRP SideVision™ Sonar expands your underwater horizon with crystal-clear, bank-to-bank displays of fish, bait and underwater structure.
Engineered with the same CHIRP sonar technology as Raymarine’s award winning DownVision™ the CP200 uses advanced CHIRP signal processing technology to let you see further, see more clearly, and detect more fish than traditional side scanning sonars.
CP200 delivers side scan sonar imagery so close to reality we call it Visionality™. See amazing photo-like imagery of underwater terrain and man-made objects.
Raymarine CHIRP signal processing delivers high resolution and excellent long range performance. Identify objects and see fish even further, out to 600-feet on each side!
Dual Independent Transducer Arrays
Best-in-class side scan performance using two high-performance transducer arrays with dedicated CHIRP sonar channels.
High-Angle Setting for Shallow Water Applications
Low-Angle Setting for Deep Water Applications
See Further
Independently adjustable transducer arrays enable anglers to preset their SideVision™ transducer angle for either shallow or deep water applications. Left and Right sonar images up to 600' / 183m either side of the boat.
Connect the CP200 with Raymarine LightHouse II powered multifunction displays, including aSeries, cSeries, eSeries, the NEW eS Seriens and the gS Series systems.
Engineered for high performance CHIRP sonar, the CPT-200 transducer is perfectly matched to the CP200’s CHIRP transceiver.
Note: This transducer is not suitable for mounting on vessels where the transom is aft of the propeller(s)
Combine the CP200 with CHIRP DownVision™ for the ultimate in sonar intelligence, giving you a full 180 degree view of your underwater surroundings.
Add CHIRP DownVision™ to your network with a CP100 DownVision Sonar or an aSeries multifunction display (DownVision™ models only)
GENERAL SPECIFICATIONS | ||
Dimensions | ![]() |
|
Weight | 0.6 kg (1.32 lbs) | |
Connections | Power (power cable), transducer (9 pin connector), and RayNet network connector | |
Compatible with | aSeries, cSeries, eSeries, the New eS Series and gS Series Note: Ensure you have the latest software |
|
CHIRP SideVision™ Specifications |
||
Channels | 2 x CHIRP SideVision™ (port and starboard) | |
Beam coverage | Port and starboard facing fan beams - wide (port / starboard) and thin (fore / aft) | |
Range | Range performance up to 183m (600ft) | |
Power Specifications |
||
Nominal supply voltage | 12 V / 24 V dc | |
Operating voltage range | 10.8 V to 31.2 dc | |
Power consumption | 5.6 W (maximum) | |
Current | 1 A peak | |
Fuse / breakers | 5 A | |
Environmental Specifications | ||
Operating temperature | 0ºC - +55ºC (+32ºF - +131ºF) | |
Storage temperature | -30ºC - +70ºC (-22ºF - +158ºF) | |
Relative humidity | 95% | |
Waterproofing | IPX6 and IPX7 | |
In the Box | ||
Typical Box contents | ![]() |
|
Item | Description | Quantity |
1 | Sonar module | 1 |
2 | Documentation pack | 1 |
3 | Mounting screws | 4 |
4 | Power cable 1m (3.28 ft) | 1 |
Part Number | Product Description |
E70256 | CP200 CHIRP/ SideVision sonar module |
E70257 | CP200 CHIRP/ SideVision sonar module and CPT-200 SideVision transom transducer |
SideVision and DownVision Bundle | |
T70229 | CP100 & CP200 System Pack with DownVision and SideVision CPT-100 & CPT-200 Transducers |
This product can be ordered through your local Raymarine dealer
Part Number | Product Description |
A06049 | 1m (3.28 ft) power cable |
A80281 | CPT-200 Transom Mount SideVision transducer (see related products) |
A80305 | Transducer extension for CPT-200 (4m cable) |
Product Number: A80281
Note: This transducer is not suitable for mounting on vessels where the transom is aft of the propeller(s).
The CP200 sonar is compatible with the following Raymarine multifunction displays. Please note that you must be running version 10 software or later. You can download the latest update here.
There are no software updates available for the CP200.
However, your multifunction display must be running LightHouse II version 11 or later, and for best performance we recommend that you always have the latest software for your multifunction display installed.
The CP200 CHIRP SideVision™ Sonar expands your underwater horizon with crystal-clear, bank-to-bank displays of fish, bait and underwater structure.
Engineered with the same CHIRP sonar technology as Raymarine’s award winning DownVision™ the CP200 uses advanced CHIRP signal processing technology to let you see further, see more clearly, and detect more fish than traditional side scanning sonars.
CP200 delivers side scan sonar imagery so close to reality we call it Visionality™. See amazing photo-like imagery of underwater terrain and man-made objects.
Raymarine CHIRP signal processing delivers high resolution and excellent long range performance. Identify objects and see fish even further, out to 600-feet on each side!
Dual Independent Transducer Arrays
Best-in-class side scan performance using two high-performance transducer arrays with dedicated CHIRP sonar channels.
High-Angle Setting for Shallow Water Applications
Low-Angle Setting for Deep Water Applications
See Further
Independently adjustable transducer arrays enable anglers to preset their SideVision™ transducer angle for either shallow or deep water applications. Left and Right sonar images up to 600' / 183m either side of the boat.
Connect the CP200 with Raymarine LightHouse II powered multifunction displays, including aSeries, cSeries, eSeries, the NEW eS Seriens and the gS Series systems.
Engineered for high performance CHIRP sonar, the CPT-200 transducer is perfectly matched to the CP200’s CHIRP transceiver.
Note: This transducer is not suitable for mounting on vessels where the transom is aft of the propeller(s)
Combine the CP200 with CHIRP DownVision™ for the ultimate in sonar intelligence, giving you a full 180 degree view of your underwater surroundings.
Add CHIRP DownVision™ to your network with a CP100 DownVision Sonar or an aSeries multifunction display (DownVision™ models only)
GENERAL SPECIFICATIONS | ||
Dimensions | ![]() |
|
Weight | 0.6 kg (1.32 lbs) | |
Connections | Power (power cable), transducer (9 pin connector), and RayNet network connector | |
Compatible with | aSeries, cSeries, eSeries, the New eS Series and gS Series Note: Ensure you have the latest software |
|
CHIRP SideVision™ Specifications |
||
Channels | 2 x CHIRP SideVision™ (port and starboard) | |
Beam coverage | Port and starboard facing fan beams - wide (port / starboard) and thin (fore / aft) | |
Range | Range performance up to 183m (600ft) | |
Power Specifications |
||
Nominal supply voltage | 12 V / 24 V dc | |
Operating voltage range | 10.8 V to 31.2 dc | |
Power consumption | 5.6 W (maximum) | |
Current | 1 A peak | |
Fuse / breakers | 5 A | |
Environmental Specifications | ||
Operating temperature | 0ºC - +55ºC (+32ºF - +131ºF) | |
Storage temperature | -30ºC - +70ºC (-22ºF - +158ºF) | |
Relative humidity | 95% | |
Waterproofing | IPX6 and IPX7 | |
In the Box | ||
Typical Box contents | ![]() |
|
Item | Description | Quantity |
1 | Sonar module | 1 |
2 | Documentation pack | 1 |
3 | Mounting screws | 4 |
4 | Power cable 1m (3.28 ft) | 1 |
Part Number | Product Description |
E70256 | CP200 CHIRP/ SideVision sonar module |
E70257 | CP200 CHIRP/ SideVision sonar module and CPT-200 SideVision transom transducer |
SideVision and DownVision Bundle | |
T70229 | CP100 & CP200 System Pack with DownVision and SideVision CPT-100 & CPT-200 Transducers |
This product can be ordered through your local Raymarine dealer
Part Number | Product Description |
A06049 | 1m (3.28 ft) power cable |
A80281 | CPT-200 Transom Mount SideVision transducer (see related products) |
A80305 | Transducer extension for CPT-200 (4m cable) |
Product Number: A80281
Note: This transducer is not suitable for mounting on vessels where the transom is aft of the propeller(s).
The CP200 sonar is compatible with the following Raymarine multifunction displays. Please note that you must be running version 10 software or later. You can download the latest update here.
There are no software updates available for the CP200.
However, your multifunction display must be running LightHouse II version 11 or later, and for best performance we recommend that you always have the latest software for your multifunction display installed.