DOWNLOAD NOW

DOWNLOAD SOFTWARE

View Update Instructions   |   Operating Manual

FEL (Far East Languages) is for the Far Eastern Languages version of the software.  The functionality of the softwares* are identical but the FEL software provides access to the Cyrillic and Far Eastern languages such as:

 - Chinese 

 - Japanese

 - Korean

 - Greek

 - Russian

Unless you wish to use one of these languages you install the standard version of software.

* Note: Sirius weather feature is excluded from the FEL software due to it only being available in North America

IMPORTANT TERMS OF DOWNLOADING SOFTWARE

This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files.

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty.

By Downloading the software, you agree to these terms.

Open Source GPL/LGPL

Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals and Documents section of our website.

To access the open source GPL and LGPL licensed executables click here

Version

Release Date

• Improved AIS performance including increase of Class B AIS target time-out period to prevent the MFD unnecessarily dropping AIS targets and providing correct TCPA calculation of both stationary and active AIS targets.

Chart

• Chart orientation will default to using Heading data (if available) when using the vessel offset feature
• Cartography / chart data now available at latitudes higher than 78 degrees latitude
• Current arrows direction correctly displayed when using Head-Up mode
• Modified card sequencing to prevent display resets when using the Navionics 44XG / 46XG cartography

FishFinder

• Displays output speed as -.-- with no speed transducer connected to DSM unit

GPS

• Ground Trip/Log no longer increases when the vessel is stationary
• Corrected under reading Ground Trip calculation

Radar

• Corrected momentary 180 degree radar image shift
• Disabled radar overlay feature for MFDs which have not been interfaced to a heading data source (ex. autopilot, Smart Heading System, ST60 Compass, etc.). Previous C-Series Classic MFD software releases permitted radar overlay when interfaced to a COG (vessel had to have a SOG of at least 2 kts) or heading data source.

Automatic Identification Systems (AIS)

• Corrected AIS TCPA calculation
• Improved processing of target data in areas with 100+ AIS targets
• Added alarm to monitor PSRT sentence generated from AIS500
• Default AIS target status set to NOT_DEFINED

SIRIUS Marine Weather (not available in v5.04 FEL)

• Increased memory buffer to improve SR50 module connectivity
• Marine Zone forecast areas updated

General

• Added support for 16GB CF devices
• Added support for uSD / CF adaptor

• Corrected an incomplete translated message across the radar start-up page when setting the display language software to Italian

• Support for alternative Spansion memory device; support for AIS message 24

• Maintenance release to correct attached SeaTalk GPS Receivers to detect the revised WAAS satellite constellation

• Tide & Current Animation
• Compass Tape option for data bar (COG/HDG)
• Integrated autopilot control
• Range rings option added to chartplotter
• Expanded Navionics support
• SIRIUS Marine Weather & Radio support

• Using NGS RD424 radome, improvement to auto gain mode in order to track small radar targets;

• AIS support; NAVTEX compatibility
• User-selectable track intervals
• GPS-based trip log
• Engine data application 
• NMEA2000 support for engine data
• Graphical compass display
• NGS Radome compatibility

• Maintenance release to correct spurious SCN INCOMPATIBLE messages whereby, the eePROM is resetting to factory defaults
• NMEA BWR fixed to include TRUE BTW
• Added support for format FAT:32 for CF Cards

• Range scale shown to 3 decimal place 
• Support added for 3m / 6m depth contours
• Tide and current times are now shown as Local Time not UTC
• Restart GPS now performs a cold start rather than master reset
• EGNOS configuration setting added

• Improved chart screen redraw
• Improved Navionics XL3 cartography performance
• Added chart offset calibration function to Chart Setup
• Radar range indicator added to radar/chart overlay 
• Added Instrument Data Page application

• Maintenance release to correct SDRAM timing, which causes the display to randomly crash or reboot

• Initial Release