CAM220IP Marine Camera
Day and Night Network Dome Camera
CAM220IP Marine Camera
Day and Night Network Dome Camera
CAM220IP Marine Camera
Day and Night Network Dome Camera
CAM220IP Marine Camera
Day and Night Network Dome Camera
CAM220 IP Marine Camera
Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications. Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design. Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications.
Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design.
- Plug and play integration with Raymarine MFDs running Lighthouse II
- Power over Ethernet (PoE) or direct 12v DC power supply
- Simple mechanical frame allows the camera to be locked, rock steady, into position
- High bright IR LEDs for operation in total darkness
CAM220 IP Specifications
|
|
|
| GENERAL SPECIFICATIONS | |
System |
|
| CPU | 32-bit ARM9 RISC CPU up to 432MHz |
| Flash / SDRAM | 128MB / 128MB |
Camera |
|
| Image Sensor | 2.0 Megapixel 1/2.8" SONY progressive scan CMOS(Exmor) |
| Total Pixels | 1952(H) x 1116(V) 2.18 Megapixel |
| Effective Pixels | 1944(H) x 1104(V) 2.15 Megapixel |
| S/N Ratio | More than 50dB |
| Minimum Illumination | 0Lux (IR On) |
| IR Distance | 20M (4 Built-in High Power LED’s) |
| Day & Night | ICR |
| Lens | 3.6mm Wide angle Megapixel Board Lens |
| Field of View | Horizontal = 93.0 deg +/- 3 deg Vertical = 51.0 deg +/- 3 deg |
Video |
|
| Video Compression | H.264 High Profile@4.0, MJPEG –Image quality: 3 Steps |
| Resolution | Up to 1920 x 1080 (Full HD) |
| Frame Rate | H.264 Up to 30fps with 1920x1080 | MJPEG Up to 30fps with VGA resolution |
| Video Streaming | Support multi stream with H.264, MJPEG, Adjustable frame rate, CVBR/CBR in H.264 |
| Image Setting | Day & Night Auto White Balance Shutter Speed (1/4~1/2,000) DSS BLC Brightness, Contrast, Sharpness, Mirror |
System Integration |
|
| Security | Password protection, User access log, HTTPS encryption |
| Supported Protocol | HTTP, HTTPS, FTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP |
| Intelligent Video | Motion detection up to 1920x1080 with 12x12 blocks |
Physical |
|
| Power Source | DC12V/1.5A, PoE(Power over Ethernet): 802.3af |
| Power Consumption | Max. 5.4W with IR |
| Net Weight | 230g (camera only) |
| LED's | Power, Network Connection |
| Dimensions | 100mm(D) x 80mm(H) |
| General Operation Temperature | -10 degree~50 degree Celsius(14F~122F) |
| Storage Temperature | -20 degree~60 degree Celsius(-4F~140F) |
CAM220 IP Ordering Information
|
|
|
| ORDERING INFORMATION | |
| Part Number | E70347 |
| Description | CAM220 IP Camera |
In The Box
| WHAT'S IN THE BOX | |
| Quantity | Item |
| 1 | Waterproof Coupler |
| 1 | CAM220 Hardware Kit |
| 1 | CAM220 Mounting Template |
| 1 | CD (English) |
| 1 | Warranty Booklet |
| 3 | Serial Number Labels - Service |
CAM220 IP Related Products
Connecting to your marine electronics network
The CAM220IP camera is compatible with the following Raymarine Multifunction Displays.
Please note that you must be running version 14 software or later. You can download the latest update here.
.jpg)
CAM220 IP User Manual & Documents
CAM220 IP Images and Media
CAM220 IP Marine Camera
Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications. Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design. Ruggedised, High Definition, Day and Night network dome video camera suitable for above or below deck applications.
Dome design provides all round selected viability whilst the small frame size allows for rapid installation. Stylised to blend in with your boat’s aesthetic design.
- Plug and play integration with Raymarine MFDs running Lighthouse II
- Power over Ethernet (PoE) or direct 12v DC power supply
- Simple mechanical frame allows the camera to be locked, rock steady, into position
- High bright IR LEDs for operation in total darkness
CAM220 IP Specifications
|
|
|
| GENERAL SPECIFICATIONS | |
System |
|
| CPU | 32-bit ARM9 RISC CPU up to 432MHz |
| Flash / SDRAM | 128MB / 128MB |
Camera |
|
| Image Sensor | 2.0 Megapixel 1/2.8" SONY progressive scan CMOS(Exmor) |
| Total Pixels | 1952(H) x 1116(V) 2.18 Megapixel |
| Effective Pixels | 1944(H) x 1104(V) 2.15 Megapixel |
| S/N Ratio | More than 50dB |
| Minimum Illumination | 0Lux (IR On) |
| IR Distance | 20M (4 Built-in High Power LED’s) |
| Day & Night | ICR |
| Lens | 3.6mm Wide angle Megapixel Board Lens |
| Field of View | Horizontal = 93.0 deg +/- 3 deg Vertical = 51.0 deg +/- 3 deg |
Video |
|
| Video Compression | H.264 High Profile@4.0, MJPEG –Image quality: 3 Steps |
| Resolution | Up to 1920 x 1080 (Full HD) |
| Frame Rate | H.264 Up to 30fps with 1920x1080 | MJPEG Up to 30fps with VGA resolution |
| Video Streaming | Support multi stream with H.264, MJPEG, Adjustable frame rate, CVBR/CBR in H.264 |
| Image Setting | Day & Night Auto White Balance Shutter Speed (1/4~1/2,000) DSS BLC Brightness, Contrast, Sharpness, Mirror |
System Integration |
|
| Security | Password protection, User access log, HTTPS encryption |
| Supported Protocol | HTTP, HTTPS, FTP, SMTP, UPnP, DNS, DDNS, NTP, RTSP, RTP, TCP, UDP, ICMP, DHCP |
| Intelligent Video | Motion detection up to 1920x1080 with 12x12 blocks |
Physical |
|
| Power Source | DC12V/1.5A, PoE(Power over Ethernet): 802.3af |
| Power Consumption | Max. 5.4W with IR |
| Net Weight | 230g (camera only) |
| LED's | Power, Network Connection |
| Dimensions | 100mm(D) x 80mm(H) |
| General Operation Temperature | -10 degree~50 degree Celsius(14F~122F) |
| Storage Temperature | -20 degree~60 degree Celsius(-4F~140F) |
CAM220 IP Ordering Information
|
|
|
| ORDERING INFORMATION | |
| Part Number | E70347 |
| Description | CAM220 IP Camera |
In The Box
| WHAT'S IN THE BOX | |
| Quantity | Item |
| 1 | Waterproof Coupler |
| 1 | CAM220 Hardware Kit |
| 1 | CAM220 Mounting Template |
| 1 | CD (English) |
| 1 | Warranty Booklet |
| 3 | Serial Number Labels - Service |
CAM220 IP Related Products
Connecting to your marine electronics network
The CAM220IP camera is compatible with the following Raymarine Multifunction Displays.
Please note that you must be running version 14 software or later. You can download the latest update here.