EV-DBW Pack
Pack Contents:
EV-2 for Drive-by-Wire Propulsion
- EV-2 is designed for the latest drive-by-wire steering systems
- EV-2 connects directly to Raymarine’s SeaTalkng bus
- It also has a dedicated CAN Bus port for direct connection to steer-by-wire steering systems:
- ZF Pod Drives
- Volvo† IPS* and Volvo Aquamatic
- Teleflex Optimus 360 Systems (Outboard Engines)
- Yanmar VC10 and JC10 (Joystick) Control Systems
- A single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation
*Optional Volvo IPS gateway required and additional cabling
†Volvo and Volvo Penta are trademarks™ and/or registered® trademarks of Volvo Trademark Holding AB. Raymarine is not affiliated with, or endorsed by, Volvo
Example system using the EV-2 in combination with a Teleflex Optimus system
Example system using the EV-2 in combination with the Volvo Engine Gateway
Example System using the EV-2 in combination with the ECI-100
p70R / p70Rs Autopilot Control Head (Power)
The p70R / p70Rs autopilot control head is designed for power craft with push buttons and a rotary control dial. Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast. Wide horizontal and vertical viewing angles ensure the display can be seen clearly from acute positions.
The p70R / p70Rs control head also features the LightHouse user interface and a start up wizard to help you configure the pilot quickly and easily.
Evolution Cabling Kit
The Evolution SeaTalkng cable kit contains
| CABLING KIT | |
| Part Number | R70160 |
| ng Power Cable (0.4m) |  |
| 1 x SeaTalkng Backbone Cable (5m) |  |
| 1 x SeaTalkng Spur Cable (0.4m) | 
|
| 1 x SeaTalkng 5-way Connector Block |  |
| 2 x SeaTalkng T-piece Connector |  |
| 2 x SeaTalkng Terminator |  |
Evolution EV-2 Cabling Kit
The Evolution EV-2 SeaTalkng cable kit contains
| CABLING KIT | |
| Part Number | R70192 |
| 1 x SeaTalkng Power Cable (0.4m) | |
| 2 x DeviceNet / SeaTalkng Adaptor Cable (Female) |  |
| 2 x SeaTalkng Terminator | |